Talkie Support

Trying to get talkie working over my OpenVPN connections. Latest Talkie, Snow Leopard, October '08 MacBook. Oscilloscope display is fine.

Console log is attached; it doesn't appear to be opening TX sockets on my OpenVPN interfaces? I don't know.

Thanks,
Will

BTW: SMF uploads don't work. (Can't access upload path)

Code:

2/27/10 3:02:54 PM Talkie[1035] Listening on interface 192.168.1.116
2/27/10 3:02:54 PM Talkie[1035] Listening on interface 172.16.222.1
2/27/10 3:02:54 PM Talkie[1035] Listening on interface 172.16.116.1
2/27/10 3:02:54 PM Talkie[1035] Listening on interface 10.23.8.2
2/27/10 3:02:54 PM Talkie[1035] Listening on interface 169.254.127.255
2/27/10 3:02:54 PM Talkie[1035] Listening on interface 10.27.180.2
2/27/10 3:03:17 PM Talkie[1035] Listening on interface 192.168.1.116
2/27/10 3:03:17 PM Talkie[1035] Listening on interface 172.16.222.1
2/27/10 3:03:17 PM Talkie[1035] Listening on interface 172.16.116.1
2/27/10 3:03:17 PM Talkie[1035] Listening on interface 10.23.8.2
2/27/10 3:03:17 PM Talkie[1035] Listening on interface 169.254.127.255
2/27/10 3:03:17 PM Talkie[1035] Listening on interface 10.27.180.2
2/27/10 3:03:17 PM Talkie[1035] Listening on interface 192.168.1.116
2/27/10 3:03:17 PM Talkie[1035] Listening on interface 172.16.222.1
2/27/10 3:03:17 PM Talkie[1035] Listening on interface 172.16.116.1
2/27/10 3:03:17 PM Talkie[1035] Listening on interface 10.23.8.2
2/27/10 3:03:17 PM Talkie[1035] Listening on interface 169.254.127.255
2/27/10 3:03:17 PM Talkie[1035] Listening on interface 10.27.180.2
2/27/10 3:03:18 PM Talkie[1035] Listening on interface 192.168.1.116
2/27/10 3:03:18 PM Talkie[1035] Listening on interface 172.16.222.1
2/27/10 3:03:18 PM Talkie[1035] Listening on interface 172.16.116.1
2/27/10 3:03:18 PM Talkie[1035] Listening on interface 10.23.8.2
2/27/10 3:03:18 PM Talkie[1035] Listening on interface 169.254.127.255
2/27/10 3:03:18 PM Talkie[1035] Listening on interface 10.27.180.2
2/27/10 3:04:13 PM Talkie[1035] Created TX socket for interface 192.168.1.116
2/27/10 3:07:40 PM Talkie[1035] Listening on interface 10.27.180.2
2/27/10 3:08:30 PM Talkie[1149] Listening on interface 192.168.1.116
2/27/10 3:08:30 PM Talkie[1149] Listening on interface 172.16.222.1
2/27/10 3:08:30 PM Talkie[1149] Listening on interface 172.16.116.1
2/27/10 3:08:30 PM Talkie[1149] Listening on interface 10.27.180.2
2/27/10 3:08:48 PM Talkie[1149] Created TX socket for interface 192.168.1.116
2/27/10 3:08:48 PM Talkie[1149] Listening on interface 10.23.8.2
2/27/10 3:10:40 PM Talkie[1149] Listening on interface 10.23.8.2
2/27/10 3:10:40 PM Talkie[1149] Listening on interface 10.27.180.2
2/27/10 3:10:58 PM Talkie[1149] Listening on interface 169.254.127.255
2/27/10 3:12:42 PM Talkie[1279] Listening on interface 192.168.1.116
2/27/10 3:12:42 PM Talkie[1279] Listening on interface 172.16.222.1
2/27/10 3:12:42 PM Talkie[1279] Listening on interface 172.16.116.1
2/27/10 3:12:42 PM Talkie[1279] Listening on interface 10.23.8.2
2/27/10 3:12:42 PM Talkie[1279] Listening on interface 10.27.180.2
2/27/10 3:12:42 PM Talkie[1279] Listening on interface 169.254.127.255
2/27/10 3:12:51 PM Talkie[1279] Created TX socket for interface 192.168.1.116

Hi Will,

Ah! I know how to fix this - would you be able to post the output of running "ifconfig" in the Terminal app?

Talkie only opens Ethernet interfaces currently (specifically, interfaces with the "en" prefix), to avoid doing silly things like broadcasting down a ppp line.  It looks like the vpn interface has a different prefix, so I need to either add that, or find another selection criteria.

Cheers,
Michael

Sweet. Kind of a mess but the vpn interfaces are tap0 and tap1:

Code:

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
inet 127.0.0.1 netmask 0xff000000
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
ether 00:23:32:bf:34:ba
media: autoselect status: inactive
supported media: none autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,flow-control> 10baseT/UTP <full-duplex,hw-loopback> 100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX <full-duplex,flow-control> 100baseTX <full-duplex,hw-loopback> 1000baseT <full-duplex> 1000baseT <full-duplex,flow-control> 1000baseT <full-duplex,hw-loopback>
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::223:6cff:fe7f:7239%en1 prefixlen 64 scopeid 0x5
inet 192.168.1.116 netmask 0xffffff00 broadcast 192.168.1.255
ether 00:23:6c:7f:72:39
media: autoselect status: active
supported media: autoselect
vmnet1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 172.16.222.1 netmask 0xffffff00 broadcast 172.16.222.255
ether 00:50:56:c0:00:01
vmnet8: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 172.16.116.1 netmask 0xffffff00 broadcast 172.16.116.255
ether 00:50:56:c0:00:08
tap0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 10.23.8.2 netmask 0xffffff00 broadcast 10.23.8.255
ether b2:e5:08:93:75:a8
open (pid 1224)
tap1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 10.27.180.2 netmask 0xffffff00 broadcast 10.27.180.255
inet 169.254.127.255 netmask 0xffff0000 broadcast 169.254.255.255
ether 56:bf:34:70:3c:0f
open (pid 1228)

I've emailed you a pre-release copy that should solve the problem - let me know how it goes